Paragon Track Performance Big Brake Kit (PA035 6 piston) - Audi C7 A6/S6/A7/S7 / D4 A8 Front - 378mm or 410mm rotors

Paragon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials/components were used to ensure the brake kits to perform and last under both street and track conditions.

{tab=Information}

Paragon Track Performance Big Brake Kit (PA035 6 piston) - Audi C7 A6/S6/A7/S7 / D4 A8 Front

Paragon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials/components were used to ensure the brake kits to perform and last under both street and track conditions.

Features Paragon PA035 6 piston calipers

Fully-floating 2-piece rotors, with 72 directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors

Hard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions

Piston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes

Confidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability

Recommended usage: Street / Track

Complete pre-assembled axle set

Includes:

One pair of Paragon PA035 6 piston calipers

One pair of Paragon 72 vane fully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips

One set of Paragon P3 “Street/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)

One pair of caliper mounting brackets and all necessary hardware

One pair of Goodridge DOT approved stainless steel braided brake lines

One set of caliper anti rattle clips

Detailed installation manual

Application:

2012-Present Audi A6/S6 (C7) Front

2011-2018 Audi A7/S7 (C7) Front

2011-2017 Audi A8 (D4) Front

Kit Number:

PBK.05.070.378.360.TL.01.02.Px.F (378x36mm Rotor)

PBK.05.070.410.360.TL.01.02.Px.F (410x36mm Rotor)

Features

Lightweight single-piece aluminium Mono-bloc design for optimum strength

Staggered piston bore sizes for improved brake balance and even pad wear

High stiffness (firm pedal)

Pin-mounted pads provide low threshold pressure and minimize unwanted noises

Features dust seals to improve durability and protection against debris / road salt

PA035 6 Piston Calipers

Paragon PA015 track performance 6 piston brake caliper

CNC machined from billet 6061-T6 aluminum

Outstanding rigidity. Reduces compliance which allow for a consistent pedal feel, and improves responsiveness/modulation characteristics

Titanium nitride (TiN) coated pistons. Improve durability and extend service intervals by protecting the sliding surfaces of the pistons. Allow smooth piston travel

TiN coated stainless steel brake caliper pistons

Stainless steel pistons can act as an effective thermal barrier due to the lower thermal conductivity vs. aluminum pistons, which help prevent brake fluid boiling and brake fade. Extra machining is done to minimize contact with the pads

Staggered piston bore sizes for improved brake balance and even pad wear

High temperature piston seals and internal dust seals are utilized to withstand the heat generated under harsh track conditions and extend caliper service life. Internal dust seals are able to offer protection against debris/contaminants and will not melt as easily as the external dust boots that are commonly used on OEM calipers

High temp seals installed in Paragon PA015 6 piston brake caliper

Hard anodized finish for improved wear resistance. Unlike painted/powder coated calipers, hard anodized finish will not deteriorate under extreme heat

Replaceable stainless steel abutment plates to allow smooth braking action and prevent wear on the caliper body

Strong, yet lightweight. Each caliper weighs 6.5 lbs (without pads)

Optional anti-knockback springs

Stainless steel bleed screws and crossover pipes

Each caliper is pressure tested to guarantee proper operation

Floating 2-piece Rotors

Floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads

Superior braking and cooling performance

Features 72 directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking

Made of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability

Heat treated to release stress in the rotor to avoid deformation and vibration

State-of-the-art CBN surface machining to ensure better break-in with new brake pads

Excellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade

Replacement rotor rings available at competitive price

Curved Directional Ventilation Vanes

Features 72 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.

Slotted Friction Face

Slotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.

Hard Anodized Aluminum Hats

CNC machined from lightweight 6061-T6 aerospace grade aluminum

Unsprung weight reduction

High strength and durability

Hard anodized to increase resistance to wear, corrosion, and discoloration

Floating Bobbins & Mounting System

Utilizes T-Bobbin rotor to hat mounting system to allow "float" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.

Caliper Mounting Brackets

CNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.

Paragon Brake Pads

Manufactured by Winmax Japan

Superior stopping power and modulation

High fade resistance

Consistent performance under high temperature conditions

Compounds available for street, street / track, and dedicated track applications

PA035 caliper uses a common pad shape, with compounds readily available from various manufacturers

Goodridge Stainless Steel Braided Brake Lines

Superior durability. Abrasion and corrosion resistant

Allows more responsive and firmer pedal feel

DOT / TÜV certified

goodridge-stainless-steel-braided-brake-lines-paragon-performance.jpg

{tab=Wheel Fitment}

Wheel Fitment Template Download (PDF):378x36mm / 410x36mm

>How to use the wheel fitment template (PDF)

**378mm brake kits generally require 18"/19" or larger wheels, while 410mm brake kits generally require 20" or larger wheels. Fitment varies due to different specs / wheel design. Verify fitment with wheel fitment template.

{tab=Installation Guide}

{/tabs}

SKU: PBK.05.070.378-410.360.TL.01.02.Px.F -01

Price

Collections

Audi Brake Upgrades